MEASUREMENTS: Topping HS01 - USB 2.0 Isolator & Ground Loop Eliminator (and a listen to Santana's "Blessings and Miracles")

Hey everyone, as you might be aware, I'm not a fan of USB "doohickeys" in general use. You know, all those USB boxes that are supposed to clean up your signal, or maybe reduce jitter, or "regenerate" this and that. Especially if you're not sure if you actually need it; some of these devices cost hundreds of dollars. On the lower price end, I had a look at the AudioQuest JitterBug FMJ last year which was a rather disappointing product.

Having said this, there are devices that can provide benefits like USB isolation for things like DACs. For example, the USB1 inexpensive ADuM4160 devices like this Nobsound ADuM4160. The problem is that this is only operating up to USB1 12Mbps "full speed". Furthermore, one would be limited to 24/96 performance even if the device is able to fall back and negotiate as USB Audio Class 1.

Enter the Topping HS01 (~US$70), a little black metal USB2.0 box advertised as providing galvanic isolation (to 1kVrms), for data and power lines with USB-B (to computer), and USB-A (to audio device) ends. Furthermore, there's a USB-C plug for devices that need extra power.

[Note: This device is not compatible with USB1.0/1.1. So don't be plugging in keyboards and mice to this. Non-audio devices like USB2 memory sticks and even my smart phone were fine. I have not tried plugging a USB2 hub up to this point so there might be issues there.]

MEASUREMENTS: Experiments in audio component grounding - using a bus bar & HumX. And on the last The Cranberries album, audio quality legacy...

You may remember a number of years ago, I talked about reducing interference I was experiencing with my Emotiva XSP-1 pre-amp. The issue had to do with the audio system picking up interference and noise through the pre-amp's "Home Theater Bypass" unbalanced RCA input when connected to my AV receiver. This "HT Bypass" mode is used as a conduit for the front channels and subwoofer out when the AV receiver is in use, typically when I watch movies with multichannel sound.

While this was a bit of a hassle for me, sometimes out of these hurdles and limitations, one is provided with opportunities to explore things like the 8kHz USB PHY packet noise which seeped into my system from the TEAC UD-501 DAC (not an issues these days with my Oppo UDP-205). Playing with things like the Corning Optical USB 3 extender allowed me to lower the noise level. Furthermore, I was also able to show that different USB hubs affected the severity of that 8kHz noise. Remember that much of this investigation was prompted in those days when devices like the AudioQuest USB Jitterbug and the silly single-port-hub known as the UpTone Audio USB Regen were being hyped up by certain websites and forums. To this day, I have not seen any evidence that this stuff improved things like noise level and jitter with reasonable asynchronous USB DACs.