MEASUREMENTS: "Noisy" Switching Power Supplies vs. Lithium Battery Packs (12V battery with RME ADI-2 Pro FS & Topping D10 DAC results)

Perhaps we don't think about it much or give it enough credit. I believe one of the advances in the last few decades that has provided the foundation for technological progress we enjoy today is the lithium ion battery. Li batteries were commercially released in 1991 and since then, thanks to the energy density available, combined with increasingly efficient electronics, all kinds of things these days can run off battery power - cars being the poster-child of this advancement...

A few weeks ago, I showed the little Class-D amplifier system running off a battery. How about we try out my RME ADI-2 Pro FS on batteries:

What you see here is the device connected to the Talentcell 6000mAh 12V Li-Ion battery pack. Since the RME ADC has become my standard for measurements in the last year, I have wanted to make it "portable". Talentcell makes an even smaller 3000mAh 12V battery which would work fine. While a little larger in size and weight, the 6000mAh unit is still lightweight and will be able to power the ADC/DAC for >5 hours - enough for any recording and measurement I would want to do in a single sitting.

LISTENING: Fully battery-powered wireless streamer & amplifier system (Yeeco - TI TPA3116D2, TalentCell 12V battery)

A few weeks ago, I read this review on an independent audiophile site about an inexpensive Nobsound Class D amplifier based on the TI TPA3116 chip. I was curious so I ordered an equivalent one off Amazon - the little Yeeco Bluetooth-capable amplifier shown above with box contents including the 12V power supply for <$US32 (for an even cheaper package, here's one without the switching power supply, <US$25).

As you can see, the reviewer linked above gave the product some positive comments on the sound. I was curious to listen and since we know that Class D amps like these are very efficient, how about we run the playback system - music streamer to amp to speakers - completely wirelessly and battery powered for a listen also?

MEASUREMENTS: Raspberry Pi 3 B+ as streamer - switching power supply, battery, WiFi, touchscreen noise??? (32GB RAM, MI: Fallout and The Beatles' 2018 "White Album")

Battery-powered Raspberry Pi 3 B+ with JustBoom Digi. Bohemian Rhapsody soundtrack.

Remember that within audiophile circles, there are often all kinds of claims about noise affecting streaming devices; especially computer-based devices. I already touched on this last week when referencing the videos by Innuos. Over the years, I had addressed software playback, different OS's, lossless formats, "need" for ethernet galvanic isolation, and explored the lack of difference between machines used for playback. In a similar way this post will also explore some "received wisdom" which seem so common among mainstream industry-supported audiophile websites.

Since I had my set-up running for last week's evaluation of the JustBoom Digi, I figure I might as well do a few more tests to demonstrate for myself (and you, fellow readers) whether these beliefs hold any truth.