The E1DA Cosmos Stack: ADCiso and 2 APUs. An example of bad multichannel - Neil Young's 'Harvest' on DVD-A (2002), fixed in new Atmos mix.

E1DA Cosmos ADCiso Grade A center.
Cosmos ADC Prototype I've been using over the years to the left.

Readers here probably are aware that over the last few years, I've been using the E1DA line of devices, the Cosmos ADC, APU, and Scaler typically paired with PC-based software like Room EQ Wizard for most of my measurements, especially for the highest fidelity products like DACs. As a hobbyist exploring objective performance, there's obviously no need to spend thousands of dollars on devices like the Audio Precision (here's a peek inside the APx555B top-of-the-line model, around US$30k). Not enough return on investment unless one is doing professional product design and testing.

As usual, over time things evolve around here and since I needed an extra ADC for work-related purposes, I bought one of the newer E1DA Cosmos ADCiso Grade A to replace the prototype that Ivan sent me back in 2021 which I will repurpose elsewhere.

This post is mainly an update and comparison, refer to the original article on the Cosmos ADC for more details.

MEASUREMENTS: Topping D10s - an inexpensive high performance basic USB DAC with S/PDIF outs. And on "perceptibly perfect" DACs.

 

Hey everyone, I suspect many of you have already seen or heard of the Topping D10s by now (~US$100-110 at time of writing). It has been out since spring/summer 2020, a DAC released during the early pandemic.

Basically, this is an update of the Topping D10 which I reviewed back in 2019 with change to the DAC chip from the ESS ES9018K2M to the ES9038Q2M with improved specs - lower noise, higher dynamic range, etc.

I bought this through the usual retail channels as I'm planning to give the D10 away to a family member. Let's have a deeper look and consider the implications of this change in the DAC chip to the overall performance.